本文へ移動

Pulse sampling oscillation unit

Encoder signal sampling oscillation

In the facilities needing line synchronization, an encoder pulse signal is available for facilities breaking off.
It gets and outputs an input encoder pulse and can usually output oscillation pulses at the frequency that I sampled just before in a reshuffling signal timing.
(as for the input pulse, the output pulse MAX100kHz)

Time measurement frequency oscillation between two points

In the facilities needing line synchronization, it is available for the facilities which I cannot attach the encoder to.
By the result that located a sensor in two places, and performed a frequency operation from the passage time between two points,
I can output an oscillation pulse.
(as for the distance between the sensor as for MAX9, 999mm, the output pulse MAX100kHz)

Fixed frequency oscillation

In the facilities needing line synchronization, I can attach neither the encoder nor the detection sensor
It is available for facilities. I can output the oscillation pulse of the frequency that I set.
(as for the output pulse MAX100kHz)
※Input/output pulse becomes only the single phase pulse.
※The parameter setting such as each mode can be configured by WEB screen or touch panel (option).
//ncs-eng.co.jp/en/files/libs/78/201903221732358660.png  For details, please refer to a PDF file than the following link.
Adobe Reader is necessary to open the document.
Nicosu Corporation 
2-30, Hatabumiyanoshita-chou, Shimonoseki-city,
Yamaguchi 751-0829 JAPAN
TEL.+81-83-251-1180
FAX.083-250-6638
2024年4月
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
2024年5月
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
TOPへ戻る